| Product Name: | 50W Anti Drone Jammer Module | Material: | GaN |
|---|---|---|---|
| Feature: | Circulator | Weight: | 250G |
| Size: | 132*53*18mm | Shield Bands: | Customized |
| Vibration Need: | Car Load OK | ||
| Highlight: | dual band signal booster,cellular signal booster |
||
WIFI 5G 5.2ghz 5.8ghz GaN chip circulator anti drone jammer amplifier module
This wifi 5.2ghz 5.8ghz anti drone jammer module is of the high average output power, good in-band flatness and the small offset between upper and lower side band. The frequency band and output power of the module can be customized according to customer needs.
*High performance cost ratio
*Warm up slowly
*Low dielectric loss
Product Features
* With small size and light weight ,it is convenient to install the anti drone jammer system
* It is special designed for HD image drone 5.2ghz 5.8ghz
* With aluminum alloy shell , very rugged , anti-corrosion ,anti-heat.
*This band support multiple signal bands customization according to personal request such as 2.4ghz 5.2ghz gnss 5.8ghz
*When shielding the drone signal, only the drone signal is shielded, and it will not have any adverse effect on the base station.
*With stable high output 100W jamming subject only 3-5seconds .
Product Application
For This anti drone jammer module :
* It can be used in examination rooms, conference rooms, libraries, churches and other places where the use of drone is prohibited to prevent students from cheating and mobile phone noise pollution;
* It can be used in gas stations, gas stations, oil depots and other places to prevent fire or explosion caused by people using fpv here;
*It can be used in serious places such as government bases and courts to prevent leaks;
* It can be used in companies or factories to prevent work accidents caused by the illege drone .
Specifications :
| No. | Item | Data | Unit |
| 1 | Frequency | Customized | MHz |
| 2 | Test voltage | 28 | V |
| 3 | Current | 3.8 | A |
| 4 | Output | 50 | W |
| 5 | Gain | 47 | dB |
| 6 | Output stability | 1 | dB |
| 7 | Connector | SMA/ Female | |
| 8 | Output connector VSWR | ≤1.30 (No power and VNA test) | |
| 9 | Power supply wire | Red+Black+Enable wire | |
| 10 | Enable Control | High ON Low Off | |
| 11 | Out shell Size | 132*53*18 | mm |
| 12 | Mount hole | 125*46 | mm |
| 13 | Weight | 250 | g |
| 14 | Work Temperature | -40~+65 | ℃ |
| 15 | Out shell material | Aluminum | |
| 16 | Vibration need | Car load OK | |
Pictures :
![]()
![]()